Bluetooth protocol: Bluetooth Specification v2.0 + EDR
USB Protocol: USB v1.1/2.0
Operating frequency: 2.4 ~ 2.48GHz unlicensed ISM band
Modulation: GFSK (Gaussian Frequency Shift Keying)
Transmit Power: ≤ 4dBm, Class 2
Transmission distance: 20 ~ 30m in free space
Sensitivity: ≤-84dBm at 0.1% BER
Transfer rate: Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps/1Mbps
Safety features: Authentication and encryption
Support profiles: Bluetooth serial port
Serial port baud rate: 4800 ~ 1382400 / N / 8 / 1 default: 9600
LED indicator: STATE state: Search state (high 104ms 342ms 2.9Hz cycle flicker) connection status (high 104ms cycle 2s 0.5Hz flashing), LINK Status: Always after match
Input Voltage: +3.5 V ~ +8 V DC and 3.3V DC/50mA
Working temperature: -20 ℃ ~ +55 ℃
Module Size: 40 � 20 � 13mm
Arduino Uno Original, versi terbaru R3 kemasan DUS bersegel asli buatan italy. setiap pembelian gratis kabel USB. harga 320rb
Spoiler for open this:
Spoiler for open this:
for Uno R3:
This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins. Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). Warnings: The Arduino Uno R3 requires the Arduino 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine. If you are interested in reading more about the changes to the IDE, check out the official Arduino 1.0 Release notes! Specification ATmega328 microcontroller Input voltage - 7-12V 14 Digital I/O Pins (6 PWM outputs) 6 Analog Inputs 32k Flash Memory 16Mhz Clock Speed
Tersedia juga macam-macam sensor dan macam2 shield ardunio buatan DFRobot.
APC220 radio Communication Module: 550rb
Digital capacitive touch sensor: 180rb
3 Axis accelerometer: 160rb
vibration sensor: 45rb
Analog sound sensor: 80rb
piezo disk vibration sensor: 45rb
Relay Module: 80rb
URM37 Ultrasonic sensor: 220rb
Spoiler for open this:
Spoiler for open this:
for ultrasonic:
SPI 8 LED module: 150rb
LM35 analog linear temperature sensor for arduino: 45rb
line tracking sensor for arduino: 65rb
Spoiler for open this:
Spoiler for open this:
for line tracking:
Sharp GP2D12 ranger sensor: 120rb
Adjustable IR sensor: 75rb
DHT11 Temp. and Humidity sensor for arduino: 75rb
Flame sensor for arduino: 40rb
Spoiler for open this:
Spoiler for open this:
for flame sensor:
Digital IR motion sensor for arduino: 75rb
Analog Ambient Light sensor for arduino: 50rb
Digital magnetic sensor for arduino: 30rb
DFRduino Mega (100% sama dg Arduino Mega): 390rb
Spoiler for open this:
Spoiler for open this:
for mega:
DFRduino Mega 100% sama dan compatible dengan Arduino Mega original.
Arduino Mega adalah sebuah microcontroller board yang menggunakan chip ATmega 1280. mempunyai 54 pin input/output digital (dimana 14pin nya dapat digunakan sebagai output PWM), 16 pin input analog, 4 UARTs (hardware serial ports), 16 MHz crystal oscillator, Koneksi USB, power jack, ICSP header, dan juga tombol reset. Modul ini memiliki semuanya yang dibutuhkan untuk mensupport microcontroller nya. Hanya tinggal mencolok kabel USB dari port USB yang tersedia ke sebuah komputer atau nyalakan dengan menggunakan power jack yang tersedia ke sebuah power supply dan anda siap untuk menggunakan modul ini.
Ardunio Mega compatible dengan sebagian besar shields yang didesign untuk Arduino Duemilanove or Diecimila.
Spec:
Microcontroller ATmega1280
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 54 (of which 14 provide PWM output)
Analog Input Pins 16
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 128 KB of which 4 KB used by bootloader
23rd May 2012
Arduino Wifi Shield, Bluetooth, Xbee dan macam-macam sensor
