JUAL Gsm Shield Module For Arduino Uno Mega

[MisterCod]

Gsm Shield Module For Arduino Uno Mega
Rp. 400.000
Beli Nego

Lokasi : Jawa Tengah Kondisi : New Posted on : 10-11-2016 09:30 Terjual : 0 barang telah terjual Dilihat : 41 kali Berat : 500 gram Last Sundul : 13 December 2016, 09:09:43 AM


Penjelasan Produk

Misi gan, mo nawarin Sim900 Gsm Gprs Quad Band Shield Module For Arduino Uno Mega


Kondisi : second (mo buat praktek nggak jadi)



SIM900 Quad-band GSM GPRS Shield Development Board For Arduino



Feature:



The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones.

The GPRS Shield provides you a way to communicate using the GSM cell phone network.

The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM and SIMCOM enhanced AT Commands).

The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.



Specifications:



Quad-Band MHz - would work on GSM networks in all countries across the world.

GPRS multi-slot class 10/8

GPRS mobile station class B

Compliant to GSM phase 2/2+

Class 4 (2 W @ MHz)

Class 1 (1 W @ MHz)

Control via AT commands - Standard Commands: GSM Enhanced Commands: SIMCOM AT Commands.

Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).

Embedded TCP/UDP stack - allows you to upload data to a web server.

RTC supported.

Selectable serial port.

Speaker and Headphone jacks

Low power consumption - 1.5mA(sleep mode)

Industrial Temperature Range - -40C to +85 C



Application:



M2M (Machine 2 Machine) Applications.

Remote control of appliances.

Remote Weather station or a Wireless Sensor Network.

Vehicle Tracking System with a GPS module.



Cautions:



Make sure your SIM card is unlocked.

The product is provided as is without an insulating enclosure. Please observe ESD precautions specially in dry (low humidity) weather.

The factory default setting for the GPRS Shield UART is 19200 bps 8-N-1. (Can be changed using AT commands).

Power select - select the power supply for GPRS shield(external power or 5v of arduino)

Power jack - connected to external 4.8~5VDC power supply

Antenna interface - connected to external antenna

Serial port select - select either software serial port or hareware serial port to be connected to GPRS Shield

Hardware Serial - D0/D1 of Arduino

Software serial - D7/D8 of Arduino

Status LED - tell whether the power of SIM900 is on

Net light - tell the status about SIM900 linking to the net

UART of SIM900 - UART pins breakout of SIM900

Microphone - to answer the phone call

Speaker - to answer the phone call

GPIO,PWM and ADC of SIM900 - GPIO,PWM and ADC pins breakout of SIM900

Power key - power up and down for SIM900



pict : nyusuL



Harga : Rp. 400K



phone : 081325032600

• gsmshields
• arduino

<ol> <ol>


<ol> .* .*



<ol> <ol>

<ol> <ol> <ol>



</div></div>