| FAQ |
| Calendar |
|
|
#1
12th December 2012
|
||||
|
||||
WTS Charger V6AC
Kondisi Barang : Baru
Harga : Lokasi Seller : Jawa Barat Description : WTS Charger V6AC [/spoiler][spoiler=open this] for Foto:     Charges, Discharges and Balances For Li-Po, A-123 Li-Fe Ni-CD, Ni-MH, Li-Ion and PB Batteries charge power : max. 50W Discharge power:max.5W Discharge current range : 0.1~1.0A Charge current range: 0.1-5.0A Current drain for balancing LiPo : 300mah/cell NiCd/NiMH battery cell count: 1 - 15cells LiPo/LiLo/LiFe battery cell count: 1 - 6cells Pb battery voltage : 2V-20V Input voltage : DC 10.5-18.0V, AC 100-240V Built In AC Power Supply Usable with DC 12V Power Supply, such as Car Battery Touch Pad Keyboard SPECIAL FEATURES: Optimized operating software. An AUTO function that sets the current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's incorrect setting. Can disconnect the circuit automatically and alarm once detecting any malfunction. Employs an individual-cell-voltage balancer. You don't need to connect an external balancer for balance charging. During the process of discharging, V6AC Balance Charger can monitor and balance each cell of the battery pack individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal V6AC Balance is adaptable to various types of Lithium batteries, such as Li-ion, Li-Po and the new Li-Fe series of batteries. Fast and storage mode for lithium batteries. Fast charge reduces the duration of charging. Store state can control the final voltage of your battery, to store for a long time and protect useful life time of the battery. Maximum safety! Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery voltage exceeds the threshold, the process will be terminated automatically. Automatic charging current limit: You can set up the upper limit of the charging current when charging your Ni-Cd or Ni-MH battery; especially useful for Ni-MH batteries of low impedance and capacity when using the AUTO charging mode. Capacity limit: The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value. Temperature threshold* The battery internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. * This function is available by connecting optional temperature probe, which is not included. Data store/load; A maximum of five Charging Profile can be stored for user convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out this data at any time without any special program setting. Package Includes: V6AC Charger North American Style Power Cord Various Charging Adapters. External Balance Plug JST_XH Apapter (Most Common Balance Plug.) User Manual Price: 600rb Contact: 085624166166 Lokasi: Bandung mephistohobbyshop.blogspot.com Terkait:
|
 |
|
|
