Ceriwis  

Go Back   Ceriwis > Jual Beli > Electronic > Home Theatre & Sound System

Home Theatre & Sound System Khusus jual beli Home theater dan sound system

Reply
 
Thread Tools
  #1  
Old 6th November 2012
ArieRugi's Avatar
ArieRugi ArieRugi is offline
Senior Ceriwiser
 
Join Date: Nov 2012
Posts: 5,575
Rep Power: 20
ArieRugi mempunyai hidup yang Normal
Default Sansui AU-9500 JDM 100Volt..Mulus..Collectible

Kondisi Barang : Bekas

Harga :



Lokasi Seller : Jawa Timur


Description :



Permisi agan semua ,saya mau menjual salah satu AMplifier legendaris ,very Collectible

Langsung saja ya agan semua mau dijual :

Sansui AU-9500

Integrated amplifier

Daya : 2 x 85Watts @8ohm

Kondisi masih bagus dan normal

Menggunakan 8 bh transistor output merk Motorola

Japan Domestic Market sehingga menggunakan voltage 100Volt

Salah satu amplifier Sansui dengan daya cukup besar

Barang cukup berat (24 kg)

Harga : SOLDto Jkt

083876467899

Lokasi surabaya



Spec:

Rating of a mode

Form Integrated Amplifier

Output power Music power (IHF): 260W (4ohm, 1kHz)

Effective output (one-side-channel operation): 85W/85W (8ohm, 1kHz)

Effective output (both channel operation): 80W+80W (8 ohm, 1kHz)

Succession effective output (both channel operation, the rated distortion of 8 ohm, 20Hz - 20kHz): 75W+75W

THD (Output power) 0.1% or less

Cross modulation distortion 0.1% or less (an Output power, 70Hz:7kHz=4:1, SMPTE)

Power Band Width (IHF) 5Hz - 40kHz

Frequency characteristic 3Hz - 80kHz, and +0 -1 dB (at the time of main-amplifier and 1W output)

Dumping factor 50 (8ohm)

Input sensitivity/input impedance

(1kHz) Phono1:2.5mV/50kohm

Phono2:2.5mV/30kohm, 50kohm, 100kohm

[maximum permissible input 300mV, THD 0.5%or less]

MIC: 2.5mV / 50kohm

Tuner, AUX(level adjustment is possible):100mV /, 50kohm

Tape Monitor1, 2 (PIN) (level adjustment is possible):100mV / 50kohm

2 (DIN):100mV of Tape Monitor / 50kohm

4ch, N.R.Adaptor:100mV /, 50kohm

An Output voltage/Output load impedance Tape Rec1, 2 (PIN):100mV / 1.5kohm

2 (DIN):30mV of Tape Rec / 70kohm

4ch, N.R.Adaptor:100mV /, 1.5kohm

Preamplifier (Output power): 0.8V/1.5kohm

[maximum output and THD 0.5%or less] :4.5V

Crosstalk (Output power 1kHz) Phono1, 2:50dB or more

A hum and a noise (IHF) Phono1, 2:75dB or more

Tuner, AUX: 85dB or more

Main amplifier: 100dB or more

Tone control Bass(Defeat, 150Hz, 300Hz, 600Hz): �15dB (20Hz), a 3dB step

Midrange(Defeat, 750Hz, 1.5kHz, 3kHz): �5dB (1.5kHz), a 1dB step

Treble(Defeat, 6kHz, 3.5kHz, 2kHz): �15dB (20kHz), a 3dB step

Loudness (volume-30dB) 50Hz:+10dB

10kHz:+8dB

A low filter 25Hz, 50Hz:-3dB (12 dB/oct)

A high filter 12kHz, 6kHz:-3dB (12 dB/oct)

The semiconductor used Transistor: 58

FET:2

Diode: 37

Power dissipation 205W (a maximum of 550 VA)

Dimensions Width 500x height 140x depth of 347mm

Weight 23.3kg

































Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


 


All times are GMT +7. The time now is 08:10 AM.


no new posts