JUAL mic shure asli bergaransi resmi. barang terjamin 100% mampir gan

[iwanfals21]

Kondisi Barang : Baru

Harga :



Lokasi Seller : DKI Jakarta


Description :

Mic SHURE asli bergaransi resmi dan barang dijamin awet gan. beli barangny dan buktikan sendiri! (ada kartu garansi resminya gan)



SM 58

[/spoiler]

Spoiler for open this:

Spoiler for open this:

for Specification:




Specification:

Type: Dynamic (moving coil)

Frequency Response : 50 to 15,000 Hz

Polar Pattern: Unidirectional

(cardioid), rotationally symmetrical

about microphone axis,uniform with

frequency

Sensitivity (at 1,000 Hz Open Circuit

Voltage): -54.5 dBV/Pa (1.85 mV) 1 Pa

= 94 dB SPL

Impedance: Rated impedance is 150

ohms (300 ohms actual) for

connection to microphoneinputs

rated low impedance

Polarity: Positive pressure on

diaphragm produces positive voltage

on pin 2 with respect to pin 3

Connector : Three-pin professional

audio connector (male XLR type)

Case : Dark gray, enamel-painted, die

cast metal; matte-finished, silver,

spherical steelmesh grille

Net Weight: 298 grams (10.5 oz)

BETA 58A

Spoiler for open this:

Spoiler for open this:

for Specification:




Specification:

Type: Dynamic (moving coil)

Frequency Response: 50 to 16,000 Hz

Polar Pattern: Supercardioid,

rotationally symmetrical about

microphone axis, uniform with

frequency.

Output Level (at 1,000 Hz): Open

Circuit Voltage: -51.5 dBV/Pa* (2. 6 mV)

*1 Pa = 94 dB SPL

Impedance: Rated impedance is 150

ohms (290 ohms actual) for

connection to microphone inputs

rated low Z Phasing. Positive pressure

on diaphragm produces positive

voltage on pin 2 with respect to pin 3.

Case: Silver blue enamel-painted die

cast metal with hardened, matte-

finished, spherical steel mesh grille.

Adjustable, Stand Adapter: Slip- in

microphone mounting, unbreakable,

adjustable through 180 degrees with

standard 5/8 "-27 thread, black finish.

Net Weight: 278 grams (9. 92 oz)

SM 86

Spoiler for open this:

Spoiler for open this:

for Specification:




Specification:

Transducer Type: Condenser

(electret bias)

Frequency Response: 50 to 18,000

Hz

Polar Pattern: Cardioid

Output Impedance: 150 Ohms at 1

kHz Recommended minimum load

impedance: 600 Ohms

Sensitivity (at 1,000 Hz): Open Circuit

Voltage: -50 dBV/Pa (3. 15 mV) (1 Pa =

94 dB SPL)

Output Clipping Level: 1000 Ohm

Load at 1,000 Hz: +3 dBV (1.41 V)

Maximum SPL (at 1, 000 Hz): 1000

ohm load (1% THD): 147 dB

Self-Noise: 23 dB typical, A-weighted

Dynamic Range (1000 ohms) 124 dB

(maximum SPL to A-weighted noise

level

Signal-to-Noise Ratio: 71 dB at 94 dB

SPL (IEC 651)* *S /N ratio is difference

between 94 dB SPL and equivalent SPL

of self- noise A-weighted .

Polarity: Positive pressure on

diaphragm produces positive voltage

on pin 2 relative to pin 3 of the output

connector.

Power: Phantom Supply

Requirement: 11 to 52 Vdc, positive at

both pins 2 and 3 Current Drain: 5.2

mA

Connector: Three-pin (XLR)

professional audio

Case Dark gray enamel-painted steel

with matte-finished silver colored steel

grille

Net Weight: 278 grams (9. 8 oz)

Environmental Conditions:

Operating: -18 degrees to 60 degrees

C (0 degrees to 135 degrees F)

(relative humidity >90%). Storage: -29

degrees to 74 degrees C (-20 degrees

to 165 degrees F) (relative humidity

>80%)

BETA 87A

[spoiler=open this] for Specification:




Specification:

Cartridge Type: Condenser (electret

bias)

Frequency Response: 50 to 20,000 Hz

Polar Pattern: Supercardioid

Output Impedance: Rated at 150

ohms (100 ohms actual +/ - 20%).

Recommended minimum load

impedance: 800 ohms

Sensitivity: (at 1,000 Hz) Open Circuit

Voltage -52.5 dBV/Pa (2 mV) (1 Pa = 94

dB SPL)

Clipping Level (at 1, 000 Hz): 1000

ohm Load: -6 dBV (0.5 V)

Maximum SPL (at 1,000 Hz): 140.5 dB

(0.25 % THD, 1000 ohm load)

Self-Noise: (equivalent sound

pressure level; measured with true

rms voltmeter) 23.5 dB typical, A-

weighted 25.5 dB typical, weighted

per DIN 45 405

Dynamic Range: 117 dB (maximum

SPL to A-weighted noise level)

Signal-to-Noise Ratio: 70.5 dB at 94

dB SPL (IEC 651) (S/N ratio is

difference between 94 dB SPL and

equivalent SPL of self-noise A-

weighted.)

Polarity: Positive pressure on

diaphragm produces positive voltage

on pin 2 relative to pin 3

Power: Phantom Supply

Requirement: 11 to 52 Vdc, positive at

both pins 2 and 3 Current Drain: 1.0

to 1.2 mA

Connector: Three-pin (XLR)

professional audio

Case: Aluminum construction with

blue metallic finish, and hardened

steel grille with nickel satin chrome

plating

Net Weight: 207 grams (7. 6 oz)