Log in

View Full Version : JUAL Sansui AU-9500 JDM 100Volt..Mulus..Collectible


ArieRugi
6th November 2012, 10:01 AM
Kondisi Barang : Bekas

Harga :



Lokasi Seller : Jawa Timur


Description :



Permisi agan semua ,saya mau menjual salah satu AMplifier legendaris ,very Collectible

Langsung saja ya agan semua mau dijual :

Sansui AU-9500

Integrated amplifier

Daya : 2 x 85Watts @8ohm

Kondisi masih bagus dan normal

Menggunakan 8 bh transistor output merk Motorola

Japan Domestic Market sehingga menggunakan voltage 100Volt

Salah satu amplifier Sansui dengan daya cukup besar

Barang cukup berat (24 kg)

Harga : SOLDto Jkt

083876467899

Lokasi surabaya



Spec:

Rating of a mode

Form Integrated Amplifier

Output power Music power (IHF): 260W (4ohm, 1kHz)

Effective output (one-side-channel operation): 85W/85W (8ohm, 1kHz)

Effective output (both channel operation): 80W+80W (8 ohm, 1kHz)

Succession effective output (both channel operation, the rated distortion of 8 ohm, 20Hz - 20kHz): 75W+75W

THD (Output power) 0.1% or less

Cross modulation distortion 0.1% or less (an Output power, 70Hz:7kHz=4:1, SMPTE)

Power Band Width (IHF) 5Hz - 40kHz

Frequency characteristic 3Hz - 80kHz, and +0 -1 dB (at the time of main-amplifier and 1W output)

Dumping factor 50 (8ohm)

Input sensitivity/input impedance

(1kHz) Phono1:2.5mV/50kohm

Phono2:2.5mV/30kohm, 50kohm, 100kohm

[maximum permissible input 300mV, THD 0.5%or less]

MIC: 2.5mV / 50kohm

Tuner, AUX(level adjustment is possible):100mV /, 50kohm

Tape Monitor1, 2 (PIN) (level adjustment is possible):100mV / 50kohm

2 (DIN):100mV of Tape Monitor / 50kohm

4ch, N.R.Adaptor:100mV /, 50kohm

An Output voltage/Output load impedance Tape Rec1, 2 (PIN):100mV / 1.5kohm

2 (DIN):30mV of Tape Rec / 70kohm

4ch, N.R.Adaptor:100mV /, 1.5kohm

Preamplifier (Output power): 0.8V/1.5kohm

[maximum output and THD 0.5%or less] :4.5V

Crosstalk (Output power 1kHz) Phono1, 2:50dB or more

A hum and a noise (IHF) Phono1, 2:75dB or more

Tuner, AUX: 85dB or more

Main amplifier: 100dB or more

Tone control Bass(Defeat, 150Hz, 300Hz, 600Hz): �15dB (20Hz), a 3dB step

Midrange(Defeat, 750Hz, 1.5kHz, 3kHz): �5dB (1.5kHz), a 1dB step

Treble(Defeat, 6kHz, 3.5kHz, 2kHz): �15dB (20kHz), a 3dB step

Loudness (volume-30dB) 50Hz:+10dB

10kHz:+8dB

A low filter 25Hz, 50Hz:-3dB (12 dB/oct)

A high filter 12kHz, 6kHz:-3dB (12 dB/oct)

The semiconductor used Transistor: 58

FET:2

Diode: 37

Power dissipation 205W (a maximum of 550 VA)

Dimensions Width 500x height 140x depth of 347mm

Weight 23.3kg



http://img831.imageshack.us/img831/8170/img1361ze.jpg



http://img401.imageshack.us/img401/5892/img1362a.jpg



http://img827.imageshack.us/img827/264/img1363e.jpg



http://img94.imageshack.us/img94/3035/img1371gr.jpg



http://img20.imageshack.us/img20/4324/img1370x.jpg



http://img96.imageshack.us/img96/4599/img1365kl.jpg



http://img88.imageshack.us/img88/5792/img1368f.jpg



http://img600.imageshack.us/img600/8740/img1369n.jpg