iwanfals21
26th September 2012, 08:56 AM
Kondisi Barang : Baru
Harga :
Lokasi Seller : DKI Jakarta
Description :
Mic SHURE asli bergaransi resmi dan barang dijamin awet gan. beli barangny dan buktikan sendiri! (ada kartu garansi resminya gan)
SM 58
http://i1140.photobucket.com/albums/n579/anto_anita17/1324722567.jpg
[/spoiler] for Specification:
Specification:
Type: Dynamic (moving coil)
Frequency Response : 50 to 15,000 Hz
Polar Pattern: Unidirectional
(cardioid), rotationally symmetrical
about microphone axis,uniform with
frequency
Sensitivity (at 1,000 Hz Open Circuit
Voltage): -54.5 dBV/Pa (1.85 mV) 1 Pa
= 94 dB SPL
Impedance: Rated impedance is 150
ohms (300 ohms actual) for
connection to microphoneinputs
rated low impedance
Polarity: Positive pressure on
diaphragm produces positive voltage
on pin 2 with respect to pin 3
Connector : Three-pin professional
audio connector (male XLR type)
Case : Dark gray, enamel-painted, die
cast metal; matte-finished, silver,
spherical steelmesh grille
Net Weight: 298 grams (10.5 oz)
BETA 58A
http://i1140.photobucket.com/albums/n579/anto_anita17/1324722568.jpg
for Specification:
Specification:
Type: Dynamic (moving coil)
Frequency Response: 50 to 16,000 Hz
Polar Pattern: Supercardioid,
rotationally symmetrical about
microphone axis, uniform with
frequency.
Output Level (at 1,000 Hz): Open
Circuit Voltage: -51.5 dBV/Pa* (2. 6 mV)
*1 Pa = 94 dB SPL
Impedance: Rated impedance is 150
ohms (290 ohms actual) for
connection to microphone inputs
rated low Z Phasing. Positive pressure
on diaphragm produces positive
voltage on pin 2 with respect to pin 3.
Case: Silver blue enamel-painted die
cast metal with hardened, matte-
finished, spherical steel mesh grille.
Adjustable, Stand Adapter: Slip- in
microphone mounting, unbreakable,
adjustable through 180 degrees with
standard 5/8 "-27 thread, black finish.
Net Weight: 278 grams (9. 92 oz)
SM 86
http://i1140.photobucket.com/albums/n579/anto_anita17/1324722569.jpg
for Specification:
Specification:
Transducer Type: Condenser
(electret bias)
Frequency Response: 50 to 18,000
Hz
Polar Pattern: Cardioid
Output Impedance: 150 Ohms at 1
kHz Recommended minimum load
impedance: 600 Ohms
Sensitivity (at 1,000 Hz): Open Circuit
Voltage: -50 dBV/Pa (3. 15 mV) (1 Pa =
94 dB SPL)
Output Clipping Level: 1000 Ohm
Load at 1,000 Hz: +3 dBV (1.41 V)
Maximum SPL (at 1, 000 Hz): 1000
ohm load (1% THD): 147 dB
Self-Noise: 23 dB typical, A-weighted
Dynamic Range (1000 ohms) 124 dB
(maximum SPL to A-weighted noise
level
Signal-to-Noise Ratio: 71 dB at 94 dB
SPL (IEC 651)* *S /N ratio is difference
between 94 dB SPL and equivalent SPL
of self- noise A-weighted .
Polarity: Positive pressure on
diaphragm produces positive voltage
on pin 2 relative to pin 3 of the output
connector.
Power: Phantom Supply
Requirement: 11 to 52 Vdc, positive at
both pins 2 and 3 Current Drain: 5.2
mA
Connector: Three-pin (XLR)
professional audio
Case Dark gray enamel-painted steel
with matte-finished silver colored steel
grille
Net Weight: 278 grams (9. 8 oz)
Environmental Conditions:
Operating: -18 degrees to 60 degrees
C (0 degrees to 135 degrees F)
(relative humidity >90%). Storage: -29
degrees to 74 degrees C (-20 degrees
to 165 degrees F) (relative humidity
>80%)
BETA 87A
http://i1140.photobucket.com/albums/n579/anto_anita17/1324722570.jpg
[spoiler=open this] for Specification:
Specification:
Cartridge Type: Condenser (electret
bias)
Frequency Response: 50 to 20,000 Hz
Polar Pattern: Supercardioid
Output Impedance: Rated at 150
ohms (100 ohms actual +/ - 20%).
Recommended minimum load
impedance: 800 ohms
Sensitivity: (at 1,000 Hz) Open Circuit
Voltage -52.5 dBV/Pa (2 mV) (1 Pa = 94
dB SPL)
Clipping Level (at 1, 000 Hz): 1000
ohm Load: -6 dBV (0.5 V)
Maximum SPL (at 1,000 Hz): 140.5 dB
(0.25 % THD, 1000 ohm load)
Self-Noise: (equivalent sound
pressure level; measured with true
rms voltmeter) 23.5 dB typical, A-
weighted 25.5 dB typical, weighted
per DIN 45 405
Dynamic Range: 117 dB (maximum
SPL to A-weighted noise level)
Signal-to-Noise Ratio: 70.5 dB at 94
dB SPL (IEC 651) (S/N ratio is
difference between 94 dB SPL and
equivalent SPL of self-noise A-
weighted.)
Polarity: Positive pressure on
diaphragm produces positive voltage
on pin 2 relative to pin 3
Power: Phantom Supply
Requirement: 11 to 52 Vdc, positive at
both pins 2 and 3 Current Drain: 1.0
to 1.2 mA
Connector: Three-pin (XLR)
professional audio
Case: Aluminum construction with
blue metallic finish, and hardened
steel grille with nickel satin chrome
plating
Net Weight: 207 grams (7. 6 oz)
Harga :
Lokasi Seller : DKI Jakarta
Description :
Mic SHURE asli bergaransi resmi dan barang dijamin awet gan. beli barangny dan buktikan sendiri! (ada kartu garansi resminya gan)
SM 58
http://i1140.photobucket.com/albums/n579/anto_anita17/1324722567.jpg
[/spoiler] for Specification:
Specification:
Type: Dynamic (moving coil)
Frequency Response : 50 to 15,000 Hz
Polar Pattern: Unidirectional
(cardioid), rotationally symmetrical
about microphone axis,uniform with
frequency
Sensitivity (at 1,000 Hz Open Circuit
Voltage): -54.5 dBV/Pa (1.85 mV) 1 Pa
= 94 dB SPL
Impedance: Rated impedance is 150
ohms (300 ohms actual) for
connection to microphoneinputs
rated low impedance
Polarity: Positive pressure on
diaphragm produces positive voltage
on pin 2 with respect to pin 3
Connector : Three-pin professional
audio connector (male XLR type)
Case : Dark gray, enamel-painted, die
cast metal; matte-finished, silver,
spherical steelmesh grille
Net Weight: 298 grams (10.5 oz)
BETA 58A
http://i1140.photobucket.com/albums/n579/anto_anita17/1324722568.jpg
for Specification:
Specification:
Type: Dynamic (moving coil)
Frequency Response: 50 to 16,000 Hz
Polar Pattern: Supercardioid,
rotationally symmetrical about
microphone axis, uniform with
frequency.
Output Level (at 1,000 Hz): Open
Circuit Voltage: -51.5 dBV/Pa* (2. 6 mV)
*1 Pa = 94 dB SPL
Impedance: Rated impedance is 150
ohms (290 ohms actual) for
connection to microphone inputs
rated low Z Phasing. Positive pressure
on diaphragm produces positive
voltage on pin 2 with respect to pin 3.
Case: Silver blue enamel-painted die
cast metal with hardened, matte-
finished, spherical steel mesh grille.
Adjustable, Stand Adapter: Slip- in
microphone mounting, unbreakable,
adjustable through 180 degrees with
standard 5/8 "-27 thread, black finish.
Net Weight: 278 grams (9. 92 oz)
SM 86
http://i1140.photobucket.com/albums/n579/anto_anita17/1324722569.jpg
for Specification:
Specification:
Transducer Type: Condenser
(electret bias)
Frequency Response: 50 to 18,000
Hz
Polar Pattern: Cardioid
Output Impedance: 150 Ohms at 1
kHz Recommended minimum load
impedance: 600 Ohms
Sensitivity (at 1,000 Hz): Open Circuit
Voltage: -50 dBV/Pa (3. 15 mV) (1 Pa =
94 dB SPL)
Output Clipping Level: 1000 Ohm
Load at 1,000 Hz: +3 dBV (1.41 V)
Maximum SPL (at 1, 000 Hz): 1000
ohm load (1% THD): 147 dB
Self-Noise: 23 dB typical, A-weighted
Dynamic Range (1000 ohms) 124 dB
(maximum SPL to A-weighted noise
level
Signal-to-Noise Ratio: 71 dB at 94 dB
SPL (IEC 651)* *S /N ratio is difference
between 94 dB SPL and equivalent SPL
of self- noise A-weighted .
Polarity: Positive pressure on
diaphragm produces positive voltage
on pin 2 relative to pin 3 of the output
connector.
Power: Phantom Supply
Requirement: 11 to 52 Vdc, positive at
both pins 2 and 3 Current Drain: 5.2
mA
Connector: Three-pin (XLR)
professional audio
Case Dark gray enamel-painted steel
with matte-finished silver colored steel
grille
Net Weight: 278 grams (9. 8 oz)
Environmental Conditions:
Operating: -18 degrees to 60 degrees
C (0 degrees to 135 degrees F)
(relative humidity >90%). Storage: -29
degrees to 74 degrees C (-20 degrees
to 165 degrees F) (relative humidity
>80%)
BETA 87A
http://i1140.photobucket.com/albums/n579/anto_anita17/1324722570.jpg
[spoiler=open this] for Specification:
Specification:
Cartridge Type: Condenser (electret
bias)
Frequency Response: 50 to 20,000 Hz
Polar Pattern: Supercardioid
Output Impedance: Rated at 150
ohms (100 ohms actual +/ - 20%).
Recommended minimum load
impedance: 800 ohms
Sensitivity: (at 1,000 Hz) Open Circuit
Voltage -52.5 dBV/Pa (2 mV) (1 Pa = 94
dB SPL)
Clipping Level (at 1, 000 Hz): 1000
ohm Load: -6 dBV (0.5 V)
Maximum SPL (at 1,000 Hz): 140.5 dB
(0.25 % THD, 1000 ohm load)
Self-Noise: (equivalent sound
pressure level; measured with true
rms voltmeter) 23.5 dB typical, A-
weighted 25.5 dB typical, weighted
per DIN 45 405
Dynamic Range: 117 dB (maximum
SPL to A-weighted noise level)
Signal-to-Noise Ratio: 70.5 dB at 94
dB SPL (IEC 651) (S/N ratio is
difference between 94 dB SPL and
equivalent SPL of self-noise A-
weighted.)
Polarity: Positive pressure on
diaphragm produces positive voltage
on pin 2 relative to pin 3
Power: Phantom Supply
Requirement: 11 to 52 Vdc, positive at
both pins 2 and 3 Current Drain: 1.0
to 1.2 mA
Connector: Three-pin (XLR)
professional audio
Case: Aluminum construction with
blue metallic finish, and hardened
steel grille with nickel satin chrome
plating
Net Weight: 207 grams (7. 6 oz)