Access control Wireless connection control: MAC-based
SSID broadcast SSID broadcast enable/disable
802.1X IEEE 802.1X support
Wireless client isolation Wireless client devices can be isolated from each other either within an SSID or between 2 SSIDs
Wireless Security Monitor Scan and classify wireless devices in the network
Report new client and access point joining network and suspicious network events (works together with Cisco WUSB 200, WMP200 or WPC200 business client adapters):
� Intrusion alarms (e.g., rogue client detected, spoofed MAC address)
� Denial-of-service alarms (e.g., duration attack, association table full)
� Vulnerability alarms (e.g., access point is not using encryption, access point is broadcasting SSID)
� Other alarms (e.g., low speed connection)
Quality of Service
QoS � 4 queues
� Wi-Fi Multimedia (WMM) wireless priority
General
� Wireless roaming based on IAPP
� Auto-channel selection
Environmental
Dimensions
W x H x D 6.69 x 8.07 x 7.68 in.
(170 x 205 x 195 mm)
Unit weight 0.88 lb (0.4 kg)
Power 12V 1A DC Input, and IEEE 802.3af compliant PoE
Maximum power draw: 3.36W
Certification FCC, ICES-003, CE
Operating temperature 32� to 104�F (0� to 40�C)
Storage temperature -4� to 158�F (20� to 70�C)
Operating humidity 10% to 85% noncondensing
Storage humidity 5% to 90% noncondensing
Packege
� Cisco WAP200 Wireless-G Access Point
� 2 SMA detachable dipole antennas
� User guide on CD-ROM
� Ethernet network cable
� Power adapter
� Product stands
� Registration card
Minimum Requirements
� 802.11b, 802.11g wireless adapter with TCP/IP installed per PC
� Switch/router with PoE support or PoE injector when used with PoE
� Web-based configuration: Java-enabled web browser
Product Warranty
3-year limited hardware warranty with return to factory replacement and 90-day limited software warranty.
[spoiler=open this] for Barang:
Nyusul gan
Barang 99% kaya baru gan
Alasan Di jual Ga dipake gan dari pada nganggur mendingan dijual dijadiin duit
23rd May 2012
Cisco Wireless - G WAP200 MANTAP
