Daftar

Ducati V8 Project. V-twin jadi V8 tanpa ngerubah crankcase


Motor Wadah berkumpulnya pecinta, hobby, pemilik Motor.

Balas
 
Alat Thread
Avatar JapanStyle
JapanStyle JapanStyle sedang offline
20th October 2012 #1
Ceriwiser Tanggal Bergabung: Oct 2012 Post: 941 Rep Power: 16 JapanStyle mempunyai hidup yang Normal
Default Ducati V8 Project. V-twin jadi V8 tanpa ngerubah crankcase
Ducati V8 Project









Do you remember Dieter Hartmann-Wirthwein? He built that amazing little 125cc inline 4 Monkey bike. I guess Dieter isn't the kind of guy who sits around all satisfied with himself, he figured he could do something even better so he's busy working on another project, an 868cc Ducati V8, he calls it Ducati-Elenore.



This is still very much a work in progress, you can see from the photos the heads and valvetrain need quite a bit of work but the pistons seem to be situated in their respective cylinders so he's at least part way there. He's obviously a man of few words because there's very little information on his website. If my translation is correct, it will be a 2 valve desmo (No desmo, same as 125, Thanks, Hugo) with valves of 27mm and 23mm, the cylinders have a 56mm bore and 43mm stroke.

















After everyone saw the patent drawing of the Ducati Elenore V8 built by Dieter Hartmann-Wirthwein, there was a lot of head scratching going on as everyone tried to visualize the engine internals in motion. I asked Dieter if he had any more images from other perspectives so he uploaded a few and, even better, the video he used at his display at Intermot. Seeing everything in motion answers a lot of questions and makes the design work look even more impressive.







Dieter also corrected one statement in the original article about the crankshaft, it's not the original, but is a new unit machined with a 44mm hub and offset laterally so the cylinder bank is centered in the frame. He sent the above photo to show us his work. He also said the crankshaft he used in the 125cc inline 4 monkey bike was the original.











UPDATE: As noted above, the 125cc Monkey bike uses the original crankshaft. Dieter confirms that the Monkey inline 4 uses the same piston and rod arrangement as the Ducati V8 project. If you're not sure it will work, watch the video below:









sumber copas:



http://thekneeslider.com/archives/20...ti-v8-project/

http://thekneeslider.com/archives/20...ore-v8-update/

</div>
Balas


Aturan Posting
Kamu tidak boleh membuat thread baru
Kamu tidak boleh membalas
Kamu tidak boleh mengirim lampiran
Kamu tidak boleh mengedit post kamu

BB code Hidup
Smilie saat ini Hidup
Kode [IMG] adalah Hidup
Kode HTML adalah Mati


Terkait
Thread Pembuat Thread Forum Balasan Postingan Terakhir
ngerubah video you tube jadi mp3 rumahmenteng Lounge 0 27th May 2012 10:54 PM
MANTAP [+PIC] tantangan sotosop jepang ngerubah bocah cupu jadi keren rumahmenteng Lounge 0 27th May 2012 05:52 PM
[ASK] GAN!!! gimana caranya ngerubah facebook jadi kek gini kumisfauzi Lounge 0 27th May 2012 03:31 PM
(Cendol Inside) Cuma Ngerubah Angka langsung dikasih Cendol Tanpa PM,Mau? ondelondel Lounge 0 27th May 2012 03:27 PM

Semua waktu adalah GMT +7. Waktu sekarang adalah 02:36 AM.