virusmuka
23rd May 2012, 01:53 AM
Kondisi Barang : Baru
Harga :
Lokasi Seller : DKI Jakarta
Description :
Halca Adapter S 32010-U0404-X Nokia Siemens
http://gi154.photobucket.com/groups/s275/MNF238PU2C/halca_000.jpg
� standard protocol
� small dimensions
� low power consumption
� mobile use in conjunction with notebook
� easy installation
� software interface based on NetBIOS
Dimensions : L x W x H = 93 x 56 x 19 mm
Interfaces To Computer:
- Centronics plug for connection to the PS/2-compatible printer interface
- Power cable with PS/2-compatible mouse/keyboard connector
To Partner Station : 3m X.21 data cable with 15-pin sub-D connector
Power Supply : +5V�5%, power consumption max. 200 mA
Protocol : HDLC (LAPB), X.21, can be configured as DCE or DTE, cycle generated by the DCE.
Data Transfer Rate : 64 kbit/s
Software Interface
- Via NetBIOS interrupt with NetBIOS control blocks.
- Memory requirement of driver software approx. 64 Kbytes.
- Software integration for higher protocol layer (upon
request).
Software Requirements :
- MS-DOS 3.3
- Windows 3.11
- Windows 95/98
- Windows NT4
- Windows 2000/XP
Hardware Requirements :
- 80486 processor 33 MHz or better
- PS/2-compatible printer interface (configured for bidirectional operation)
- PS/2-compatible mouse or keyboard port or comparable
Contact Us:
@ Email : [email protected]
@ YM : telcoparts
@ Web : http://telcoparts.wordpress.com
Harga :
Lokasi Seller : DKI Jakarta
Description :
Halca Adapter S 32010-U0404-X Nokia Siemens
http://gi154.photobucket.com/groups/s275/MNF238PU2C/halca_000.jpg
� standard protocol
� small dimensions
� low power consumption
� mobile use in conjunction with notebook
� easy installation
� software interface based on NetBIOS
Dimensions : L x W x H = 93 x 56 x 19 mm
Interfaces To Computer:
- Centronics plug for connection to the PS/2-compatible printer interface
- Power cable with PS/2-compatible mouse/keyboard connector
To Partner Station : 3m X.21 data cable with 15-pin sub-D connector
Power Supply : +5V�5%, power consumption max. 200 mA
Protocol : HDLC (LAPB), X.21, can be configured as DCE or DTE, cycle generated by the DCE.
Data Transfer Rate : 64 kbit/s
Software Interface
- Via NetBIOS interrupt with NetBIOS control blocks.
- Memory requirement of driver software approx. 64 Kbytes.
- Software integration for higher protocol layer (upon
request).
Software Requirements :
- MS-DOS 3.3
- Windows 3.11
- Windows 95/98
- Windows NT4
- Windows 2000/XP
Hardware Requirements :
- 80486 processor 33 MHz or better
- PS/2-compatible printer interface (configured for bidirectional operation)
- PS/2-compatible mouse or keyboard port or comparable
Contact Us:
@ Email : [email protected]
@ YM : telcoparts
@ Web : http://telcoparts.wordpress.com