BilsteinYes
4th January 2014, 01:21 PM
<div id="post_message_7034850">
http://upload.kapanlagi.com/images/pv/thumb/20100606025302_DSC00165_4c0aab1e7741b-t.jpg (http://upload.kapanlagi.com/h/20100606025302_DSC00165_4c0aab1e7741b.JPG)
http://upload.kapanlagi.com/images/pv/thumb/20100606024342_RTR_4c0aa8eecc42f-t.jpg (http://upload.kapanlagi.com/h/20100606024342_RTR_4c0aa8eecc42f.JPG)
http://upload.kapanlagi.com/images/pv/thumb/20100606024342_RTR1_4c0aa8eedae5f-t.jpg (http://upload.kapanlagi.com/h/20100606024342_RTR1_4c0aa8eedae5f.jpg)
D-Project *NEW SERIES* Adjustable Rear Traction Rods
* Problems with rear tyre ware?
* Too much camber for grip or drift?
* Want a better ride, slide or overall piece of mind?
* Or maybe you have some PHAT rims that you want to tuck under the guard without rubbing on the edge?!
* Want to improve the feel of the rear end at high straight line or cornering speeds?
The D-Project Adjustable Rear Traction Rods are CNC Machined out of Cro-Molly steel and uses true Motor Sport Quality spherical bearings.
D-Project Adjustable Rear Traction Rods have the following features and benefits:
* Required to get the perfect alignment on the Rear Nissan IRS. The Traction rod changes the pinion angle of the hubs (ie: Castor). The castor changes due to either adjustment from aftermarket rods or more importantly through the wheel travel. If the traction rod is not used, the pinion angle will not be correct and the bushes in the factory hub and traction rod will suffer from bush distortion leading to poor alignment and therefore tyre grip. This rod allows you to fine tune your grip or slip characteristics for each rear wheel to your specifications when combined with the Camber and Toe Rods.
* Ferrule Kit integrated with the bearing with a new technology and design to prevent pre-mature bearing ware and binding as the wheel travels up and down
* Spring Washers and Nylon locknuts so that the arms do not come loose during the rigors of drifting and racing!
* On-Car Adjustability - simply fit and bolt-on the D-Project Adjustable Rear Traction Rods and lengthen or shorten to your requirements!
* Bundle with the D-Project Adjustable Rear Camber Kit and D-Project Adjustable Rear Toe Rods and you will not only increase the adjustability, but also save money
MISI AGAN2, MO NAWARIN BARANG.
BARANG BARU, BARANG BAGUS
GAK TW BUAT MOBIL APA... MO CEK DI ESCUDO GW MASIH LAMA MO PULANG KAMPUNG..
MAKANYA MO JUAL AJA.
C.O.D JOGJA OK, PENGIRIMAN VIA JNE OK
HARGA Rp. 2.000.000
TELP/SMS 0813 9216 8787
http://upload.kapanlagi.com/images/pv/thumb/20100606025302_DSC00165_4c0aab1e7741b-t.jpg (http://upload.kapanlagi.com/h/20100606025302_DSC00165_4c0aab1e7741b.JPG)
http://upload.kapanlagi.com/images/pv/thumb/20100606024342_RTR_4c0aa8eecc42f-t.jpg (http://upload.kapanlagi.com/h/20100606024342_RTR_4c0aa8eecc42f.JPG)
http://upload.kapanlagi.com/images/pv/thumb/20100606024342_RTR1_4c0aa8eedae5f-t.jpg (http://upload.kapanlagi.com/h/20100606024342_RTR1_4c0aa8eedae5f.jpg)
D-Project *NEW SERIES* Adjustable Rear Traction Rods
* Problems with rear tyre ware?
* Too much camber for grip or drift?
* Want a better ride, slide or overall piece of mind?
* Or maybe you have some PHAT rims that you want to tuck under the guard without rubbing on the edge?!
* Want to improve the feel of the rear end at high straight line or cornering speeds?
The D-Project Adjustable Rear Traction Rods are CNC Machined out of Cro-Molly steel and uses true Motor Sport Quality spherical bearings.
D-Project Adjustable Rear Traction Rods have the following features and benefits:
* Required to get the perfect alignment on the Rear Nissan IRS. The Traction rod changes the pinion angle of the hubs (ie: Castor). The castor changes due to either adjustment from aftermarket rods or more importantly through the wheel travel. If the traction rod is not used, the pinion angle will not be correct and the bushes in the factory hub and traction rod will suffer from bush distortion leading to poor alignment and therefore tyre grip. This rod allows you to fine tune your grip or slip characteristics for each rear wheel to your specifications when combined with the Camber and Toe Rods.
* Ferrule Kit integrated with the bearing with a new technology and design to prevent pre-mature bearing ware and binding as the wheel travels up and down
* Spring Washers and Nylon locknuts so that the arms do not come loose during the rigors of drifting and racing!
* On-Car Adjustability - simply fit and bolt-on the D-Project Adjustable Rear Traction Rods and lengthen or shorten to your requirements!
* Bundle with the D-Project Adjustable Rear Camber Kit and D-Project Adjustable Rear Toe Rods and you will not only increase the adjustability, but also save money
MISI AGAN2, MO NAWARIN BARANG.
BARANG BARU, BARANG BAGUS
GAK TW BUAT MOBIL APA... MO CEK DI ESCUDO GW MASIH LAMA MO PULANG KAMPUNG..
MAKANYA MO JUAL AJA.
C.O.D JOGJA OK, PENGIRIMAN VIA JNE OK
HARGA Rp. 2.000.000
TELP/SMS 0813 9216 8787