RevelEnak
13th December 2013, 01:10 PM
<div id="post_message_5412043">
http://i709.photobucket.com/albums/ww100/rbtrzl/MercuryF1_dkoak_pair_1200.jpg?t=1252770030
"A great budget speaker - whether on the end of a micro system or budget separates". What Hi-Fi Sound and Vision magazine.
The F1 Custom speakers are brought to you by loudspeaker masters, Tannoy. With a front ported cabinet they're easy to place yet efficient enough to be run with lower powered amplifiers, including micro systems. Solidly built and finished in an apple wood effect, the Tannoy Custom F1s not only look the part but are far better built than many rivals. This build quality follows through to the sound, which is detailed, natural and a match for more expensive rivals.
For a top quality, compact speaker that will suit a wide variety of components, the Tannoy Custom F1 comes highly recommended.
"These Tannoys are both lively and entertaining in a way that eludes most of the competition. They're a great budget buy, and easy to partner, too".
"Tannoys are in a different league. They may not look it, but they sound expensive", "The eloquence and fluency of speakers in the next price point up".
TANNOY MERCURY F1 CUSTOM SPEAKERS (PAIR) SPECIFICATIONS
Power handling (watts): 100 RMS (peak)
Recommended amp power (watts): 10 - 70 RMS
Sensitivity (dB): 87
Nominal impedance (ohms): 8
Magnetically shielded? Yes
W x H x D (mm): 170 x 300 x 220
Weight (kg): 4 (each)
Frequency response (Hz): 55 - 20,000
Crossover frequency (kHz): 2.9
Biwireable? No
Connections: 4mm banana plug/binding posts
Bass port? Front reflex
Drivers: HF: 25mm(1") Nitro-Urethane layer damped woven polyester dome, shielded neodymium magnet assembly
LF: 130mm (5") coated multi-fibre paper pulp cone
Supplied accessories: Removable front grilles
Finish: Dark oak
Extra: 15mm (5/8") particle board cabinet with internal cross-bracing
Barang baru. Brand new in box. Stok terbatas.
Warna Dark Oak.
Hrg 3jt (normal price 3.5jt)
Berminat hub 08161187408
http://i709.photobucket.com/albums/ww100/rbtrzl/MercuryF1_dkoak_pair_1200.jpg?t=1252770030
"A great budget speaker - whether on the end of a micro system or budget separates". What Hi-Fi Sound and Vision magazine.
The F1 Custom speakers are brought to you by loudspeaker masters, Tannoy. With a front ported cabinet they're easy to place yet efficient enough to be run with lower powered amplifiers, including micro systems. Solidly built and finished in an apple wood effect, the Tannoy Custom F1s not only look the part but are far better built than many rivals. This build quality follows through to the sound, which is detailed, natural and a match for more expensive rivals.
For a top quality, compact speaker that will suit a wide variety of components, the Tannoy Custom F1 comes highly recommended.
"These Tannoys are both lively and entertaining in a way that eludes most of the competition. They're a great budget buy, and easy to partner, too".
"Tannoys are in a different league. They may not look it, but they sound expensive", "The eloquence and fluency of speakers in the next price point up".
TANNOY MERCURY F1 CUSTOM SPEAKERS (PAIR) SPECIFICATIONS
Power handling (watts): 100 RMS (peak)
Recommended amp power (watts): 10 - 70 RMS
Sensitivity (dB): 87
Nominal impedance (ohms): 8
Magnetically shielded? Yes
W x H x D (mm): 170 x 300 x 220
Weight (kg): 4 (each)
Frequency response (Hz): 55 - 20,000
Crossover frequency (kHz): 2.9
Biwireable? No
Connections: 4mm banana plug/binding posts
Bass port? Front reflex
Drivers: HF: 25mm(1") Nitro-Urethane layer damped woven polyester dome, shielded neodymium magnet assembly
LF: 130mm (5") coated multi-fibre paper pulp cone
Supplied accessories: Removable front grilles
Finish: Dark oak
Extra: 15mm (5/8") particle board cabinet with internal cross-bracing
Barang baru. Brand new in box. Stok terbatas.
Warna Dark Oak.
Hrg 3jt (normal price 3.5jt)
Berminat hub 08161187408