MusikNyantai
12th December 2013, 10:03 AM
<div id="post_message_2057800760">
mau jual rockford fosgate 2channel 500@2 2pcs
specification :
250 watts x 2 at 2 ohms
500 watts x 1 in bridged mode
stereo, bridged mono or Tri-Way output
MOSFET power supply and output devices
50-210 Hz high-pass/low-pass crossovers, 12 dB/octave slopes
MEHSA mounting technology increases the heat transfer from the MOSFET output devices to the heat sink, for higher power output, lower operating temperatures, and greater reliability
TOPAZ — noise-killing differential inputs that eliminate 80% of ground loop noise
Trans•ana circuitry keeps preamp voltages low and signal paths simple for outstanding audio quality
NOMAD — advanced protection circuitry for "intelligent" shutdown protection
wired remote control included for fingertip control of Punch Bass (for 0-18 dB of bass boost at 45 Hz)
Dynamic Power Rating (measured at 14.4V):
Bridged Into A 4-Ohm Load: 710 watts x 1
Per Channel Into A 2-Ohm Load: 330 watts x 2
Per Channel Into A 4-Ohm Load: 210 watts x 2
Continuous Power Rating (measured at 13.8V):
Bridged Into A 4-Ohm Load: 500 watts x 1
Per Channel Into A 2-Ohm Load: 250 watts x 2
Per Channel Into A 4-Ohm Load: 125 watts x 2
hubungi ane di 0818832456
mau jual rockford fosgate 2channel 500@2 2pcs
specification :
250 watts x 2 at 2 ohms
500 watts x 1 in bridged mode
stereo, bridged mono or Tri-Way output
MOSFET power supply and output devices
50-210 Hz high-pass/low-pass crossovers, 12 dB/octave slopes
MEHSA mounting technology increases the heat transfer from the MOSFET output devices to the heat sink, for higher power output, lower operating temperatures, and greater reliability
TOPAZ — noise-killing differential inputs that eliminate 80% of ground loop noise
Trans•ana circuitry keeps preamp voltages low and signal paths simple for outstanding audio quality
NOMAD — advanced protection circuitry for "intelligent" shutdown protection
wired remote control included for fingertip control of Punch Bass (for 0-18 dB of bass boost at 45 Hz)
Dynamic Power Rating (measured at 14.4V):
Bridged Into A 4-Ohm Load: 710 watts x 1
Per Channel Into A 2-Ohm Load: 330 watts x 2
Per Channel Into A 4-Ohm Load: 210 watts x 2
Continuous Power Rating (measured at 13.8V):
Bridged Into A 4-Ohm Load: 500 watts x 1
Per Channel Into A 2-Ohm Load: 250 watts x 2
Per Channel Into A 4-Ohm Load: 125 watts x 2
hubungi ane di 0818832456