RevelEnak
12th December 2013, 09:16 AM
<div id="post_message_9470525">
179 watts RMS x 2 at 4 ohms
305 watts RMS x 2 at 2 ohms
612 watts RMS x 1 bridged output at 4 ohms
stereo or bridged mono output
4-ohm stable in bridged mode
Tri-way capable (Tri-Way crossover required)
requires 4-gauge power and ground leads � wiring and hardware not included with amplifier
AMS Amplifier Management System (-15 to 15 dB bass level control, Q factor control, bass/treble frequency control)
variable 50-200 Hz filters (24 dB/octave low-pass, 12 dB/octave high-pass)
switchable subsonic filter (0/15 Hz, 24 dB/octave)
LED status display (AMS settings, voltage, current, temperature, fan speed, and protection status)
cooling fan
17-9/16"W x 2-7/16"H x 10-7/16"D (11-1/8"D with RCA cables connected)
http://i558.photobucket.com/albums/ss26/D_5_KY/IMG00012-20111104-0924.jpg
http://i558.photobucket.com/albums/ss26/D_5_KY/IMG00014-20111104-0926.jpg
http://i558.photobucket.com/albums/ss26/D_5_KY/IMG00015-20111104-0926.jpg
Harga 2,25jt
0815 7276 9878
179 watts RMS x 2 at 4 ohms
305 watts RMS x 2 at 2 ohms
612 watts RMS x 1 bridged output at 4 ohms
stereo or bridged mono output
4-ohm stable in bridged mode
Tri-way capable (Tri-Way crossover required)
requires 4-gauge power and ground leads � wiring and hardware not included with amplifier
AMS Amplifier Management System (-15 to 15 dB bass level control, Q factor control, bass/treble frequency control)
variable 50-200 Hz filters (24 dB/octave low-pass, 12 dB/octave high-pass)
switchable subsonic filter (0/15 Hz, 24 dB/octave)
LED status display (AMS settings, voltage, current, temperature, fan speed, and protection status)
cooling fan
17-9/16"W x 2-7/16"H x 10-7/16"D (11-1/8"D with RCA cables connected)
http://i558.photobucket.com/albums/ss26/D_5_KY/IMG00012-20111104-0924.jpg
http://i558.photobucket.com/albums/ss26/D_5_KY/IMG00014-20111104-0926.jpg
http://i558.photobucket.com/albums/ss26/D_5_KY/IMG00015-20111104-0926.jpg
Harga 2,25jt
0815 7276 9878