Hotwheeler
12th December 2012, 05:40 PM
Kondisi Barang : Baru
Harga :
Lokasi Seller : Jawa Barat
Description :
Bagi yang hobby quadcopter, ini saya tawarkan frame dari Turnigy dengan spesifikasi dan gambar seperti yang dibawah.
1. Turnigy Talon V2 Quadcopter
[/spoiler] for Harga & Spesifikasi:
Kode : FRM0001
Harga : Rp. 725.000
Stok : 1
The Turnigy Talon V2 Quadcopter frame is a crafted from high quality genuine carbon fiber offering both great looks and performance. Our engineers set out to create a Quadcopter frame without compromise, several materials were tested and rejected until they decided that only genuine carbon fiber would meet the goals we had set out to achieve. Every component was weighed and measured shaving mere grams where possible to achieve a light weight yet extremely rigid frame. We didnt allow any compromises and neither should you.
Our team took the already popular Talon frame and studied the design, based on feed back from the multi-rotor community and our own ideas we redesigned the motor mounting plates allowing for top or bottom mounting of 28 and 35 size brushless outrunner motors (see photos for reference of different mounting options). The improved clamping system alone underwent 3 redesigns until our engineers were satisfied that the perfect strength and weight saving combination had been achieved. The center frame clamping system was almost doubled in size to ensure a strong brace on each boom. We stress tested the design until a 5kg load could be held on the center plate with minimal flex from each boom. Every aspect of this frame was thoroughly examined and thought through.
All this attention to detail has resulted in the elegant simplicity that is the Talon V2, A Quad frame that we are as proud to put our name behind as you will be to own.
Specs:
Weight: 280g (w/out electronics)
Width: 550mm
Motor Bolt Holes: 17/20/26mm
for Picture:
http://cdn-u.kaskus.co.id/72/eh0jix0p.jpg
http://cdn-u.kaskus.co.id/72/e8qodz3e.jpg
http://cdn-u.kaskus.co.id/72/d69mn4rz.jpg
http://cdn-u.kaskus.co.id/72/pwgimwka.jpg
http://cdn-u.kaskus.co.id/72/sxpc7awt.jpg
http://cdn-u.kaskus.co.id/72/qlordgec.jpg
http://cdn-u.kaskus.co.id/72/kh9dzrb3.jpg
http://cdn-u.kaskus.co.id/72/g1ufjzlt.jpg
2. Turnigy Talon Carbon Fiber Quadcopter Frame
for Harga & Spesifikasi:
Kode Produk : FRM0002
Harga = Rp 425.000 (exclude ongkir)
Stok = 0 (backorder)
If your looking for a high end, no compromise quadcopter frame with looks that could kill, the Talon is for you!
The Turnigy Talon quadcopter frame is a high quality carbon fiber frame that offers both great looks and performance. Built from light weight yet extremely rigid carbon fiber and aluminum alloy, the Talon offers a great combination of weight savings and strength.
The Talon features a beautifully finished carbon fiber main frame and arms, all connected together with aluminum alloy parts. This frame really gives your quad a high-tech and quality look.
We also offer a full line of quad electronics such as quadcopter control board, ESC, motors and more, so it has never been easier or more affordable to get a quad in the air!
All necessary hardware is included.
Specs:
Weight: 240g
Width: 498mm
Motor Bolt Holes: 22~32mm
for Picture:
http://i1163.photobucket.com/albums/q548/bearisusanto/IMG_2262.jpg
http://i1163.photobucket.com/albums/q548/bearisusanto/IMG_2261.jpg
http://i1163.photobucket.com/albums/q548/Turnigy Talon Carbon Fiber Quadcopter Framebearisusanto/IMG_2260.jpg
http://i1163.photobucket.com/albums/q548/bearisusanto/IMG_2259.jpg
http://i1163.photobucket.com/albums/q548/bearisusanto/IMG_2258.jpg
http://i1163.photobucket.com/albums/q548/bearisusanto/IMG_2257.jpg
http://i1163.photobucket.com/albums/q548/bearisusanto/IMG_2256.jpg
[spoiler=open this] for Bukti Pengiriman:
http://i1163.photobucket.com/albums/q548/bearisusanto/resirev3.jpg
Jika berminat bisa PM atao SMS ke 081347337757
Untuk kelengkapan quadcopter yang lain bisa mampir di :
kam-kits (http://kam-kits.blogspot.com)
Harga :
Lokasi Seller : Jawa Barat
Description :
Bagi yang hobby quadcopter, ini saya tawarkan frame dari Turnigy dengan spesifikasi dan gambar seperti yang dibawah.
1. Turnigy Talon V2 Quadcopter
[/spoiler] for Harga & Spesifikasi:
Kode : FRM0001
Harga : Rp. 725.000
Stok : 1
The Turnigy Talon V2 Quadcopter frame is a crafted from high quality genuine carbon fiber offering both great looks and performance. Our engineers set out to create a Quadcopter frame without compromise, several materials were tested and rejected until they decided that only genuine carbon fiber would meet the goals we had set out to achieve. Every component was weighed and measured shaving mere grams where possible to achieve a light weight yet extremely rigid frame. We didnt allow any compromises and neither should you.
Our team took the already popular Talon frame and studied the design, based on feed back from the multi-rotor community and our own ideas we redesigned the motor mounting plates allowing for top or bottom mounting of 28 and 35 size brushless outrunner motors (see photos for reference of different mounting options). The improved clamping system alone underwent 3 redesigns until our engineers were satisfied that the perfect strength and weight saving combination had been achieved. The center frame clamping system was almost doubled in size to ensure a strong brace on each boom. We stress tested the design until a 5kg load could be held on the center plate with minimal flex from each boom. Every aspect of this frame was thoroughly examined and thought through.
All this attention to detail has resulted in the elegant simplicity that is the Talon V2, A Quad frame that we are as proud to put our name behind as you will be to own.
Specs:
Weight: 280g (w/out electronics)
Width: 550mm
Motor Bolt Holes: 17/20/26mm
for Picture:
http://cdn-u.kaskus.co.id/72/eh0jix0p.jpg
http://cdn-u.kaskus.co.id/72/e8qodz3e.jpg
http://cdn-u.kaskus.co.id/72/d69mn4rz.jpg
http://cdn-u.kaskus.co.id/72/pwgimwka.jpg
http://cdn-u.kaskus.co.id/72/sxpc7awt.jpg
http://cdn-u.kaskus.co.id/72/qlordgec.jpg
http://cdn-u.kaskus.co.id/72/kh9dzrb3.jpg
http://cdn-u.kaskus.co.id/72/g1ufjzlt.jpg
2. Turnigy Talon Carbon Fiber Quadcopter Frame
for Harga & Spesifikasi:
Kode Produk : FRM0002
Harga = Rp 425.000 (exclude ongkir)
Stok = 0 (backorder)
If your looking for a high end, no compromise quadcopter frame with looks that could kill, the Talon is for you!
The Turnigy Talon quadcopter frame is a high quality carbon fiber frame that offers both great looks and performance. Built from light weight yet extremely rigid carbon fiber and aluminum alloy, the Talon offers a great combination of weight savings and strength.
The Talon features a beautifully finished carbon fiber main frame and arms, all connected together with aluminum alloy parts. This frame really gives your quad a high-tech and quality look.
We also offer a full line of quad electronics such as quadcopter control board, ESC, motors and more, so it has never been easier or more affordable to get a quad in the air!
All necessary hardware is included.
Specs:
Weight: 240g
Width: 498mm
Motor Bolt Holes: 22~32mm
for Picture:
http://i1163.photobucket.com/albums/q548/bearisusanto/IMG_2262.jpg
http://i1163.photobucket.com/albums/q548/bearisusanto/IMG_2261.jpg
http://i1163.photobucket.com/albums/q548/Turnigy Talon Carbon Fiber Quadcopter Framebearisusanto/IMG_2260.jpg
http://i1163.photobucket.com/albums/q548/bearisusanto/IMG_2259.jpg
http://i1163.photobucket.com/albums/q548/bearisusanto/IMG_2258.jpg
http://i1163.photobucket.com/albums/q548/bearisusanto/IMG_2257.jpg
http://i1163.photobucket.com/albums/q548/bearisusanto/IMG_2256.jpg
[spoiler=open this] for Bukti Pengiriman:
http://i1163.photobucket.com/albums/q548/bearisusanto/resirev3.jpg
Jika berminat bisa PM atao SMS ke 081347337757
Untuk kelengkapan quadcopter yang lain bisa mampir di :
kam-kits (http://kam-kits.blogspot.com)