TamiyoDeh
12th December 2012, 04:51 PM
Kondisi Barang : Baru
Harga :
Lokasi Seller : DKI Jakarta
Description :
SORRY ALREADY SOLD OUT !!!!!!!
Futaba GY401 Gyro + S9257 Digital Servo Combo
It's the best combination for T-Rex 450 class RC electrical helicopters!
This is the Futaba GY401 Gyro with an S9257 Digital Servo. This is a high performance, compact and lightweight (AVCS) Angular Vector Control System gyro developed for model helicopters. Because the sensor and control circuit are integrated, it is simple to install.
Features:
AVCS System: Since the rudder trim changes (caused by wind and other meteorological changes) the front, rear, and other heli attitudes change and are automatically cancelled; tail (rudder) operation is easy, making it perfect for 3D flight. (also known as heading hold gyro)
SMM Gyro Sensor: Use of this newly developed technology virtually eliminates rudder trim changes during flight.
Digital Servo Compatible (DS Mode): DS mode makes it compatible with Futaba Digital Servos. This maximizes the high-speed response performance of the Digital Servo.
Included high-speed S9257 Digital Servo boasts 2.0kg-cm in torque and a speed of 0.08 sec/60� degree @ 4.8V
Remote Gain Function and Mode Switching Function Remote: Gain function allows sensitivity switching from the transmitter and mode switching function allows AVCS/normal gyro mode switching. Integrated, compact and lightweight design made possible by high density mounting technology.
PRICE : RP1,300,000.-*
*Exclude delivery fee
Order plz SMS to 089 88 11 7351
Package Includes:
1 x GY401 Digitial Gyro
1 x S9257 High Speed Digital Servo
http://cdn-u.kaskus.co.id/82/qzpdkw8k.jpg
GY401 Specifications
===============
Length: 27mm
Width: 27mm
Height: 20mm
Weight: 27g (0.95oz)
S9257 Digital Servo Detailed Specifications
==============================
Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8 Volts Only
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.08sec/60 degrees at no load
Stall Torque (4.8V): 27.8 oz/in. (2.0 kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Ball Bearing
Gear Type: All Nylon Gears
Connector Wire Length: 7.9"
Dimensions: 1.40" x 0.59"x 1.13" (35.5 x 15 x 28.6mm)
Weight: .92oz. (26g)
Harga :
Lokasi Seller : DKI Jakarta
Description :
SORRY ALREADY SOLD OUT !!!!!!!
Futaba GY401 Gyro + S9257 Digital Servo Combo
It's the best combination for T-Rex 450 class RC electrical helicopters!
This is the Futaba GY401 Gyro with an S9257 Digital Servo. This is a high performance, compact and lightweight (AVCS) Angular Vector Control System gyro developed for model helicopters. Because the sensor and control circuit are integrated, it is simple to install.
Features:
AVCS System: Since the rudder trim changes (caused by wind and other meteorological changes) the front, rear, and other heli attitudes change and are automatically cancelled; tail (rudder) operation is easy, making it perfect for 3D flight. (also known as heading hold gyro)
SMM Gyro Sensor: Use of this newly developed technology virtually eliminates rudder trim changes during flight.
Digital Servo Compatible (DS Mode): DS mode makes it compatible with Futaba Digital Servos. This maximizes the high-speed response performance of the Digital Servo.
Included high-speed S9257 Digital Servo boasts 2.0kg-cm in torque and a speed of 0.08 sec/60� degree @ 4.8V
Remote Gain Function and Mode Switching Function Remote: Gain function allows sensitivity switching from the transmitter and mode switching function allows AVCS/normal gyro mode switching. Integrated, compact and lightweight design made possible by high density mounting technology.
PRICE : RP1,300,000.-*
*Exclude delivery fee
Order plz SMS to 089 88 11 7351
Package Includes:
1 x GY401 Digitial Gyro
1 x S9257 High Speed Digital Servo
http://cdn-u.kaskus.co.id/82/qzpdkw8k.jpg
GY401 Specifications
===============
Length: 27mm
Width: 27mm
Height: 20mm
Weight: 27g (0.95oz)
S9257 Digital Servo Detailed Specifications
==============================
Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8 Volts Only
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.08sec/60 degrees at no load
Stall Torque (4.8V): 27.8 oz/in. (2.0 kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Ball Bearing
Gear Type: All Nylon Gears
Connector Wire Length: 7.9"
Dimensions: 1.40" x 0.59"x 1.13" (35.5 x 15 x 28.6mm)
Weight: .92oz. (26g)