RCBooth
12th December 2012, 03:10 PM
Kondisi Barang : Baru
Harga :
Lokasi Seller : Jawa Barat
Description :
Hsp New Body
[/spoiler] for New Model Hsp BNIB:
OUT OFF STOCK
http://s12.postimage.org/z8msycjhl/drift_biru.jpg (http://postimage.org/image/z8msycjhl/)
http://s10.postimage.org/4hmek60et/drift_merah.jpg (http://postimage.org/image/4hmek60et/)
http://s8.postimage.org/nexiuslpt/Facebook_Homescreen_Image.jpg (http://postimage.org/image/nexiuslpt/)
Remote HK310
for Remote HK310:
Harga Rp.630.000,- Nett Stock 3 pcs lagi
http://s7.postimage.org/wubtzrdiz/IMG_20110908_00501.jpg
The HK-310 is the new kid on the block at a break through price!
Featuring 2.4ghz FHSS technology, a huge 16 model memory, Detailed LCD Display, an array of user programable features such as Dual rates, EPA, Steering and throttle curves, ABS, timer and many more. The included 3ch HKR3000 Reciever has a bind button so you can say good bye to bind plugs for good!
Features:
16 Model Memory with user programable names
2.4ghz FHSS Technology
Dual Rate
EPA
ST Curve
TH Curve
TH Hold
ABS (Anti-Lock brake)
Timer
ATS (Automatic Start)
BK Mix (Brake Mixing)
Custom Mix
Fail Safe
Neutral Calibration
HKR3000 3ch RX (Included)
Detailed User manual
Required:
8 x AA Batteries
Ezrun sensorless 60A 8.5T
for Ezrun Sensorless 60A 5.5T & 8.5T:
Rp.1.100.000,-
http://s9.postimage.org/qezpqw7i3/IMG_20111023_00722.jpg (http://postimage.org/image/qezpqw7i3/)
Product Details Ezrun 60A 5.5T
-Output: Continuous current 60A, burst current 380A.
-Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
-BEC Output: 6V/1.5A.
-Resistance: 0.0007 Ohm
-Motor Supported: Sensorless Brushless motor.
-Suitable Brushless Motor:
eZRun-60A-SL: >=5.5T (Size: 3650)
-Suitable Car: 1/10, 1/12 on-road and off-road car for sportful race
-Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
-Weight: 32g(Without wires).
-KV:6000
-Diameter:36.0MM
-Length(Without Shaft):50.0MM
-Shaft:3.17MM
-Shaft Length:15MM
-Weight:200g
Note1:
For 4-6 cells NiMH or 2S Lipo: You needn�t change the cooling fan coming with the ESC;
For 7-9 cells NiMH or 3S Lipo: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);
Note2:
The values of "T" number is tested under the following conditions:
a) The input is a 6 cells NiMH battery;
b) The ESC is equipped with a cooling fan.
Item Packing
-eZRun-60A-SL brushless ESC v2 x 1
-5.5T sensorless brushless motor x 1
-Program card for car ESC x 1
Ezrun 60A 8.5T
Product Details
-Output: Continuous current 60A, burst current 380A.
-Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
-BEC Output: 6V/1.5A.
-Resistance: 0.0007 Ohm
-Motor Supported: Sensorless Brushless motor.
-Suitable Brushless Motor: Note2
eZRun-60A-SL: >=5.5T (Size: 3650)
-Suitable Car: 1/10, 1/12 on-road and off-road car for sportful race
-Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
-Weight: 32g(Without wires).
-KV:4000
-Diameter:36.0MM
-Length(Without Shaft):50.0MM
-Shaft:3.17MM
-Shaft Length:15MM
-Weight:200g
Note1:
For 4-6 cells NiMH or 2S Lipo: You needn�t change the cooling fan coming with the ESC;
For 7-9 cells NiMH or 3S Lipo: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);
Note2:
The values of "T" number is tested under the following conditions:
a) The input is a 6 cells NiMH battery;
b) The ESC is equipped with a cooling fan.
Item Packing
-eZRun-60A-SL brushless ESC V2 x 1
-3650/4000KV/8.5T sensorless brushless motor x 1
-Program card for car ESC x 1
GT Power Charger Stock 3 pcs lagi
[spoiler=open this] for GT Power Charger:
Rp.550.000,-
http://s9.postimage.org/dvwlwz8jf/IMG_20111022_00715.jpg (http://postimage.org/image/dvwlwz8jf/)
http://s7.postimage.org/greirauyf/IMG_20110803_00288.jpg (http://postimage.org/image/greirauyf/)
Product Details
-Operating Voltage Range: DC 10 - 18V, AC in: 100 - 240V, 50/60Hz
-Circuit Power: Max. 50W for charging, Max. 5W for discharging
-Charge Current Range: 0.1 - 6A
-Discharge Current Range: 0.1 - 1A
-Current drain for balancing Li-po: 300mAh/cell
-NiCd/NiMH battery cell count: 1 - 15 Cells
-Li-ion/Polymer Cell Count: 1 - 6 Series
-Pb Battery Voltage: 2 -Dimensions: 1mm
-Packet Includes: Multifuctional Connector
ym : maul.bdg77
Pin : By Request
serious only !!!
No Lowballers
No Price Police
No Bid n Run
No JUNK POST
Harga :
Lokasi Seller : Jawa Barat
Description :
Hsp New Body
[/spoiler] for New Model Hsp BNIB:
OUT OFF STOCK
http://s12.postimage.org/z8msycjhl/drift_biru.jpg (http://postimage.org/image/z8msycjhl/)
http://s10.postimage.org/4hmek60et/drift_merah.jpg (http://postimage.org/image/4hmek60et/)
http://s8.postimage.org/nexiuslpt/Facebook_Homescreen_Image.jpg (http://postimage.org/image/nexiuslpt/)
Remote HK310
for Remote HK310:
Harga Rp.630.000,- Nett Stock 3 pcs lagi
http://s7.postimage.org/wubtzrdiz/IMG_20110908_00501.jpg
The HK-310 is the new kid on the block at a break through price!
Featuring 2.4ghz FHSS technology, a huge 16 model memory, Detailed LCD Display, an array of user programable features such as Dual rates, EPA, Steering and throttle curves, ABS, timer and many more. The included 3ch HKR3000 Reciever has a bind button so you can say good bye to bind plugs for good!
Features:
16 Model Memory with user programable names
2.4ghz FHSS Technology
Dual Rate
EPA
ST Curve
TH Curve
TH Hold
ABS (Anti-Lock brake)
Timer
ATS (Automatic Start)
BK Mix (Brake Mixing)
Custom Mix
Fail Safe
Neutral Calibration
HKR3000 3ch RX (Included)
Detailed User manual
Required:
8 x AA Batteries
Ezrun sensorless 60A 8.5T
for Ezrun Sensorless 60A 5.5T & 8.5T:
Rp.1.100.000,-
http://s9.postimage.org/qezpqw7i3/IMG_20111023_00722.jpg (http://postimage.org/image/qezpqw7i3/)
Product Details Ezrun 60A 5.5T
-Output: Continuous current 60A, burst current 380A.
-Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
-BEC Output: 6V/1.5A.
-Resistance: 0.0007 Ohm
-Motor Supported: Sensorless Brushless motor.
-Suitable Brushless Motor:
eZRun-60A-SL: >=5.5T (Size: 3650)
-Suitable Car: 1/10, 1/12 on-road and off-road car for sportful race
-Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
-Weight: 32g(Without wires).
-KV:6000
-Diameter:36.0MM
-Length(Without Shaft):50.0MM
-Shaft:3.17MM
-Shaft Length:15MM
-Weight:200g
Note1:
For 4-6 cells NiMH or 2S Lipo: You needn�t change the cooling fan coming with the ESC;
For 7-9 cells NiMH or 3S Lipo: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);
Note2:
The values of "T" number is tested under the following conditions:
a) The input is a 6 cells NiMH battery;
b) The ESC is equipped with a cooling fan.
Item Packing
-eZRun-60A-SL brushless ESC v2 x 1
-5.5T sensorless brushless motor x 1
-Program card for car ESC x 1
Ezrun 60A 8.5T
Product Details
-Output: Continuous current 60A, burst current 380A.
-Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
-BEC Output: 6V/1.5A.
-Resistance: 0.0007 Ohm
-Motor Supported: Sensorless Brushless motor.
-Suitable Brushless Motor: Note2
eZRun-60A-SL: >=5.5T (Size: 3650)
-Suitable Car: 1/10, 1/12 on-road and off-road car for sportful race
-Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
-Weight: 32g(Without wires).
-KV:4000
-Diameter:36.0MM
-Length(Without Shaft):50.0MM
-Shaft:3.17MM
-Shaft Length:15MM
-Weight:200g
Note1:
For 4-6 cells NiMH or 2S Lipo: You needn�t change the cooling fan coming with the ESC;
For 7-9 cells NiMH or 3S Lipo: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);
Note2:
The values of "T" number is tested under the following conditions:
a) The input is a 6 cells NiMH battery;
b) The ESC is equipped with a cooling fan.
Item Packing
-eZRun-60A-SL brushless ESC V2 x 1
-3650/4000KV/8.5T sensorless brushless motor x 1
-Program card for car ESC x 1
GT Power Charger Stock 3 pcs lagi
[spoiler=open this] for GT Power Charger:
Rp.550.000,-
http://s9.postimage.org/dvwlwz8jf/IMG_20111022_00715.jpg (http://postimage.org/image/dvwlwz8jf/)
http://s7.postimage.org/greirauyf/IMG_20110803_00288.jpg (http://postimage.org/image/greirauyf/)
Product Details
-Operating Voltage Range: DC 10 - 18V, AC in: 100 - 240V, 50/60Hz
-Circuit Power: Max. 50W for charging, Max. 5W for discharging
-Charge Current Range: 0.1 - 6A
-Discharge Current Range: 0.1 - 1A
-Current drain for balancing Li-po: 300mAh/cell
-NiCd/NiMH battery cell count: 1 - 15 Cells
-Li-ion/Polymer Cell Count: 1 - 6 Series
-Pb Battery Voltage: 2 -Dimensions: 1mm
-Packet Includes: Multifuctional Connector
ym : maul.bdg77
Pin : By Request
serious only !!!
No Lowballers
No Price Police
No Bid n Run
No JUNK POST