RCBooth
12th December 2012, 02:48 PM
Kondisi Barang : Baru
Harga :
Lokasi Seller : DKI Jakarta
Description :
Bismillah..
Permisi om Min dan om Mod.
Numpang jualan barang2 salah beli, ternyata ukurannya ga ada yg cocok sm KIT R31. Jadi ya di jual lagi buat beli yg cocok.
Semua masih baru, di buka buat liat barangnya, tau klo ga cocok langsung di foto2 trus bungkus lagi.
Langsung liat foto sama speknya aja ya gan.
ESC 80A
http://i699.photobucket.com/albums/vv356/Aqilla_01/ESC80A.jpg
[/spoiler] for spek:
HobbyKing 80A Sensored/Sensorless Car ESC (1:8/1:5) with built in cooling fan.
Features:
Enhanced throttle response, excellent acceleration, enhanced braking and throttle linearity
Programmable with a HKSS programming card.
Automatically detects the number of cells within the battery pack.
Multiple protection features, Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor jammed protection
Compatible with Hobbking, NOVAK, LRP and ORION Sensored brushless motor
Specification:
Cont./Burst Current: 80A/270A
Resistance: 0.0018 ohm
Suitable Car: 1/5 on-road and 1/8 off-road cars / trucks
Suitable Brushless Motor: 10T On road / Off road
Battery: 5-10 cells Ni-xx (NiMH / NiCd) 2-4 cells Li-Po
BEC Output: 6V/3A of switch mode built-in BEC
Motor Type: Sensorless and Sensored brushless motor
Dimension: 55x60x40mm
Weight: 150g
Servo Turnigy TGY-930 Metal Gear
http://i699.photobucket.com/albums/vv356/Aqilla_01/ServoTurnigyTGY-930.jpg
for spek:
The Turnigy MG930 is a precision double bearing heli servo.
An excellent choice and a perfect fit for your HK-T500!
Weight: 26g
Dimension: 36.2*15.2*28.7mm
Stall torque: 3.6kg/cm (4.8V) - 4.5kg/cm (6.0V)
Operating speed: 0.14sec/60degree(4.8v) - 0.11sec/60degree(6.0V)
Operating voltage: 4.8-6.0V
Temperature range: 0- 55deg
Servo Plug: JR (Fits JR and Futaba)
Heat Sink Turnigy 36mm
http://i699.photobucket.com/albums/vv356/Aqilla_01/HeatSink36mm.jpg
[spoiler=open this] for spek:
TURNIGY Heat Sink with Fan for 36 series motors. Or motors with a diameter of 36mm
Spec.
Inner diameter: 35.55mm
Dimentions: 51 x 55 x 63mm (whole unit)
Weight: 75g
Harga
ESC = Rp SOLD
Servo = Rp SOLD
Heat Sink = Rp SOLD
Harga keknya dah murah ya gan, jadi nego dikiiitt aja..
mau rekber oke..., CoD jg oke, daerah jatibening - priuk aja..
kirim2 lebih oke
cp 08998250425
Harga :
Lokasi Seller : DKI Jakarta
Description :
Bismillah..
Permisi om Min dan om Mod.
Numpang jualan barang2 salah beli, ternyata ukurannya ga ada yg cocok sm KIT R31. Jadi ya di jual lagi buat beli yg cocok.
Semua masih baru, di buka buat liat barangnya, tau klo ga cocok langsung di foto2 trus bungkus lagi.
Langsung liat foto sama speknya aja ya gan.
ESC 80A
http://i699.photobucket.com/albums/vv356/Aqilla_01/ESC80A.jpg
[/spoiler] for spek:
HobbyKing 80A Sensored/Sensorless Car ESC (1:8/1:5) with built in cooling fan.
Features:
Enhanced throttle response, excellent acceleration, enhanced braking and throttle linearity
Programmable with a HKSS programming card.
Automatically detects the number of cells within the battery pack.
Multiple protection features, Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor jammed protection
Compatible with Hobbking, NOVAK, LRP and ORION Sensored brushless motor
Specification:
Cont./Burst Current: 80A/270A
Resistance: 0.0018 ohm
Suitable Car: 1/5 on-road and 1/8 off-road cars / trucks
Suitable Brushless Motor: 10T On road / Off road
Battery: 5-10 cells Ni-xx (NiMH / NiCd) 2-4 cells Li-Po
BEC Output: 6V/3A of switch mode built-in BEC
Motor Type: Sensorless and Sensored brushless motor
Dimension: 55x60x40mm
Weight: 150g
Servo Turnigy TGY-930 Metal Gear
http://i699.photobucket.com/albums/vv356/Aqilla_01/ServoTurnigyTGY-930.jpg
for spek:
The Turnigy MG930 is a precision double bearing heli servo.
An excellent choice and a perfect fit for your HK-T500!
Weight: 26g
Dimension: 36.2*15.2*28.7mm
Stall torque: 3.6kg/cm (4.8V) - 4.5kg/cm (6.0V)
Operating speed: 0.14sec/60degree(4.8v) - 0.11sec/60degree(6.0V)
Operating voltage: 4.8-6.0V
Temperature range: 0- 55deg
Servo Plug: JR (Fits JR and Futaba)
Heat Sink Turnigy 36mm
http://i699.photobucket.com/albums/vv356/Aqilla_01/HeatSink36mm.jpg
[spoiler=open this] for spek:
TURNIGY Heat Sink with Fan for 36 series motors. Or motors with a diameter of 36mm
Spec.
Inner diameter: 35.55mm
Dimentions: 51 x 55 x 63mm (whole unit)
Weight: 75g
Harga
ESC = Rp SOLD
Servo = Rp SOLD
Heat Sink = Rp SOLD
Harga keknya dah murah ya gan, jadi nego dikiiitt aja..
mau rekber oke..., CoD jg oke, daerah jatibening - priuk aja..
kirim2 lebih oke
cp 08998250425