GundamLovers
12th December 2012, 01:29 PM
Kondisi Barang : Baru
Harga :
Lokasi Seller : DKI Jakarta
Description :
1. Brushless towerpro 2409-18, rp. 130.000
2. Brushless towerpro TowerPro 3015-7 rp. 250.000
Possibly towerpros ugliest motor. However it packs a powerful 470W punch and comes with the towerpro pressed bell motor reliability.
Dont be put off by the humble appearance, this is a solid motor!
Model: TowerPro 3015-7
Size: 37.2*60.3
Weight: 133g
Voltage: 10v
Idle Current: 2.2A
Suggested Battery Config: 3-4Lipo
Kv: 1000RPM/v
Shaft: 5mm
Max Eff Current: 30A
Max current: 40A
Max Power: 470W
Suggested prop: 10*5, 11*5
3. Batre lipo turnigy 3S. 2650, 30C rp. 250.000
Spec.
Minimum Capacity: 2650mAh
Configuration: 3S1P / 11.1v / 3Cell
Constant Discharge: 30C
Peak Discharge (10sec): 40C
Pack Weight: 247g
Pack Size: 140 x 44 x 19mm
Charge Plug: JST-XH
Discharge Plug: 4mm Bullet-connector
http://cdn-u.kaskus.co.id/32/kfphaueu.jpg
Harga :
Lokasi Seller : DKI Jakarta
Description :
1. Brushless towerpro 2409-18, rp. 130.000
2. Brushless towerpro TowerPro 3015-7 rp. 250.000
Possibly towerpros ugliest motor. However it packs a powerful 470W punch and comes with the towerpro pressed bell motor reliability.
Dont be put off by the humble appearance, this is a solid motor!
Model: TowerPro 3015-7
Size: 37.2*60.3
Weight: 133g
Voltage: 10v
Idle Current: 2.2A
Suggested Battery Config: 3-4Lipo
Kv: 1000RPM/v
Shaft: 5mm
Max Eff Current: 30A
Max current: 40A
Max Power: 470W
Suggested prop: 10*5, 11*5
3. Batre lipo turnigy 3S. 2650, 30C rp. 250.000
Spec.
Minimum Capacity: 2650mAh
Configuration: 3S1P / 11.1v / 3Cell
Constant Discharge: 30C
Peak Discharge (10sec): 40C
Pack Weight: 247g
Pack Size: 140 x 44 x 19mm
Charge Plug: JST-XH
Discharge Plug: 4mm Bullet-connector
http://cdn-u.kaskus.co.id/32/kfphaueu.jpg